Welcome to the official website of Jiangmen Yaoke Electronics Co., Ltd.!

Why do aluminum substrates do (3000v) high voltage test?

2018-12-30 14:40:40

Today I want to talk about why the aluminum substrate is withstand voltage 3000v, 4000v. This article is because when we communicate with the aluminum substrate customers, a considerable number of customers do not pay much attention to the pressure resistance of the aluminum substrate, which is usually used by us. The voltage is 220V, the voltage in the EU, Japan and some countries is only 110V, which is why the European Union uses a low voltage of 3000V-4000V, which is due to safety awareness.


        First of all, the pressure resistance of the aluminum substrate should be understood from the structure of the aluminum substrate. It is composed of a copper-clad layer, an insulating layer and a metal base layer. The intermediate layer determines its thermal conductivity and withstand voltage, so the intermediate layer The importance of this is obvious. There are also many low-end products in the market. There are also many hidden dangers in use. Let us talk about why we should use high pressure aluminum substrates.


The withstand voltage test is to cope with the use in extreme conditions, such as the instantaneous voltage after power-on and the extreme conditions after lightning strike, respect life, and pay attention to safety hazards. We must use a good high-voltage aluminum substrate. Prevent unnecessary loss of life and property.


Article source: Jiangmen Yaoke Electronics Co., Ltd.

 www.yaokepcb.com

FEEDBACK
Jiangmen Yaoke Electronics Co., Ltd.

Tel:15219783000 / 0750-3778235
Address: 5th Floor, No. 38, Chuangye Road, No. 15 High-tech Zone, Jiangmen City
Copyright © 2018 Jiangmen Yaoke Electronics Co., Ltd. All rights reserved Technical SupportJiangmen website construction